Новые поступления

0.96 OLED High Clear Module Board for Arduino - Red imported from microview oled module chip size module
High brightness and high definition; Small size and lightweight; High resolution: 128 x 64; Viewing angle: >160 degrees; Support many control chips such as XS128 Arduino AVR STM32 and CSR chips etc.; With low power consumption; Wide voltage support; Working temperature: -30~70'C; Dimension: 27.0 x 27.0 x 4.1mm; Driver chip: SSD1306
452.04 RUR
0.96 OLED High Clear Module Board w/ 6800 / 8080 / SPI / IIC Interface - Blue imported from microview oled module chip size module
Dual-color (1/4 yellow + 3/4 blue); Small size with 0.96 inch display screen; Module size: 27mm x 25mm; High resolution: 128 x 64; Multiple interfaces: 6800 & 8080 Parallel Interfaces 3-wire or 4-wire SPI interfaces IIC interface; Convenient switching method directly modify on the board; 3.3V working voltage.
548.09 RUR
1.3 OLED White Display Module for Arduino - Deep Blue imported from microview oled module chip size module
High resolution: 128 x 64 Display color: white Viewing angle: > 160 degree Ultra-low power consumption; work properly is 0.04W Support wide voltage: 3.3~5V DC Operating temperature: -30 ~80'C Size: 32.0 x 35.5 x 4.1mm
661.39 RUR
0.96 Inch 4Pin Blue Yellow IIC I2C OLED Display Module For Arduino imported from microview oled module chip size module
0.96 Inch 4Pin Blue Yellow IIC I2C OLED Display Module For Arduino Interface: IIC/I2C GND: Power Gound VCC: 2.2V-5.5V SCL: CLK clock (High level 2.2V-5.5V) SDA: MOSI data (High level 2.2V-5.5V) Feature: Color: Blue and Yellow LED Resolution: 128x64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30C to 70C Dimension: 29.28 x 27.1 mm (LW) Compatible with 3.3V and 5V control chip I / O level OLED internal drive chip: SSD136 Package included: 1 x Blue and Yellow OLED display
6.15 RUR
0.96 inch 128 x 64 White OLED Display Module SPI Interface for Arduino imported from microview oled module chip size module
video 0.96" 128 x 64 White OLED Display Module for Arduino OLED display with backlight function, you can read the data on the display clearly. Arduino OLED display has 128 x 64 pixels, high resolution, and clear image. 3-5V wide voltage range and 0.06W power consumption. The OLED display module can be widely used in smart watch, car camera, MP3, smartphone and medical equipment etc. Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support. Specifications Name OLED Display Visual Angle >160° Pixels 128 x 64 Input Voltage 3V-5V Compatible I/O Level 3.3V, 5V Drive IC SSD1306 Pins GND: Power goundVCC: 2.2V-5.5VSCL: CLK clock (high level 2.2V-5.5V)SDA: MOSI data (high level 2.2V-5.5V)RST: Reset (high level 2.2V-5.5V)D/C: Data/command (high level 2.2V-5.5V) Product Weight 20g Package Weight 30g Panel Size 29 x 27.38mm Active Area Size 25 x 23.49mm Package Size (L x W x H) 35 x 30 x 10mm Package Contents 1 x 0.96" White SPI OLED Display Module
217.97 RUR